Setting H.323 Parameters - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Gateway
address
Subnet
prefix length
Step 2 Select Save.
----End

3.2 Setting H.323 Parameters

When an H.323 network gatekeeper (GK) is used on your videoconferencing system, set the
H.323 parameters.
Prerequisites
A GK is used on the videoconferencing system.
Background
When a GK is used in the conference system, you can set the site number and name for your
TE30. Other endpoint also registered with the GK can then use the site number or name as
well as the IP address to call your TE30.
Procedure
Step 1 Choose Advanced Settings > Settings > Network > IP > H.323. Set the H.323 parameters
by referring to
Table 3-2 H.323 parameters
Parameter
Enable GK
Issue 01 (2013-03-27)
Description
Specifies the gateway address that
corresponds to the IP address of your
TE30.
This parameter is mandatory when
Connection type is set to Static IP.
Specifies the prefix length for the IPv6
address of your TE30.
A GK is responsible for network bandwidth management, endpoint authentication, and address
translation on the videoconferencing system.
Table 3-2.
Description
Specifies whether to register your TE30
with the GK.
 If you select this parameter, the TE30
will register with the GK after being
started. After the TE30 successfully
registers with the GK, it can call
endpoints defined in the address
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Network
Setting
Contact the network
administrator.
Examples:
 IPv4 address: 192.168.1.1

IPv6 address:
2000:0:0:0:200:55:0:1
The default value is 0.
Setting
This parameter is deselected by
default.
13