Configuring The Web Browser; Logging In To The Endpoint Web Interface - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
The web-based login can be enabled or disabled on the remote controlled UI. For details, see
10.2.3 Allowing Remote

11.2 Configuring the Web Browser

Before using the web interface for TE30 remote management, configure the web browser on
your computer.
Background
The following procedure uses Internet Explorer 8.0 as an example of how to configure a
browser. The method for configuring other browser versions is similar to that for Internet
Explorer 8.0.
Procedure
Step 1 Open Internet Explorer 8.0.
Step 2 Choose Tools > Internet Options and select the Security tab.
Step 3 Select Custom level. Then select Enable for all options under Scripting and Downloads.
Step 4 Select OK.
Step 5 Select Trusted sites and then Sites.
The Trusted sites dialog box is displayed.
Step 6 In the Add this website to the zone text box, enter the IP address of your endpoint. Then
select Add.
Step 7 Select Close.
Step 8 Select the Privacy tab. Then move the slider to Medium.
Step 9 Select OK.
The configuration is complete.
----End
To set Firefox, do the following:
Start the Firefox. On the menu bar, choose Tools > Options. On the Main tab, enable Show
the Downloads window when downloading a file and on the Privacy tab, enable Accept
cookies from sites. Then select OK.

11.3 Logging In to the Endpoint Web Interface

Before using the web interface for TE30 remote management, log in to its web interface.
Issue 01 (2013-03-27)
Login.
If you choose to skip Step 5
Pop-up Blocker > Turn Off Pop-up Blocker.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
through Step 7, from the menu bar of Internet Explorer, choose Tools >
11 Web-based Remote Management
84