Huawei V100R001 User Manual page 16

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Adjust time
automatically
based on DST
Date format
Enable NTP
NTP address
type
NTP server
address
To set custom parameters listed in
Display > Personalize.
Table 2-5 Custom parameters
Parameter
Transparenc
y
Issue 01 (2013-03-27)
Description
Specifies whether to adjust the
endpoint clock based on local
observance of Daylight Savings Time
(DST).
If this function is enabled, the endpoint
clock is automatically adjusted one
hour forward.
NOTE
The presence of this parameter is
controlled by your settings of Time zone.
This parameter is available for countries
and regions that support DST.
Specifies the format in which the date
is displayed.
Specifies whether to automatically
synchronizes system time with a
Network Time Protocol (NTP) server
at an interval of 300 seconds.
NOTE
If you set this parameter to Enable NTP,
you must also set NTP server address.
Specifies the mode for your TE30 to
obtain the NTP server IP address.

Auto: Your TE30 automatically
obtains the NTP server IP address.

Manual: You must manually set
the NTP server IP address.
This parameter is available only when
Connection type is set to Dynamic
IP.
NOTE
For details about how to set Connection
type, see 3.1 Setting IP
Specifies the NTP server IP address.
Table
Description
Specifies the transparency of the
background photograph of the menu
screen.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Installation and Initial Configuration
Setting
This parameter is deselected
by default.
The default value is
YYYY/MM/DD.
This parameter is deselected
by default.
The default value is Manual.
Parameters.
No default value is set for this
parameter.
2-5, choose Advanced Settings > Settings >
Setting
The default value is 15%.
8