Automatic Upgrade; Upgrading The Te30 Locally - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide

13.2.1 Automatic Upgrade

With the automatic upgrade enabled, your TE30 obtains upgrade files from the specified
server and installs the upgrade files when the upgrade interval arrives.
Procedure
Step 1 Choose Advanced Settings > Settings > Installation > Auto Upgrade Settings.
Step 2 Set the automatic upgrade parameters by referring to
Table 13-3 Automatic upgrade parameters
Parameter
Auto upgrade
Enable wireless MIC
auto update
Upgrade interval
Server address
User name
Password
Step 3 Select Save.
----End

13.2.2 Upgrading the TE30 Locally

You can use a computer to upgrade the TE30 locally.
Before the upgrade, note the following prerequisites:

Issue 01 (2013-03-27)
Description
Specifies whether the automatic
upgrade function is enabled. If you
select this parameter, you must also set
Upgrade interval, Server address,
User name, and Password. Your
TE30 will obtain upgrade files from
the specified server and install the
upgrade files when the specified
upgrade interval is reached.
Specifies whether to automatically
update the wireless microphone after it
is connected to the TE30.
Specifies the upgrade interval.
Specifies the IP address of the server
used to store the upgrade files for your
TE30.
Specify the user name and password
used by your TE30 to access the server
that store the upgrade files.
The target software is saved to the computer.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 13-3.
Setting
This parameter is
deselected by default.
This parameter is
selected by default.
The default value is 0.5
h.
Value range: 0.5 h to 24
h.
This parameter cannot
be left blank.
Example:
http://200.55.55.100/
No default value is set
for this parameter.
13 Maintenance
107