Selecting Video Sources; Hiding The Local Video - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
The icon for the local or remote presentation disappears once the local presentation source is
disconnected from the TE30 or the sharing of the remote presentation stops.
Before a conference starts, you can set the position of the PiP window on the screen. For
details, see

8.5 Selecting Video Sources

You can specify video input ports for the local video, local presentation, and remote video.
Selecting the Local Video Source
Step 1 Press
Step 2 Press
feed as the local video source.
----End
Selecting the Local Presentation Source
Select
source.
Selecting the Remote Video Source
During a conference, you can select to view a remote video source.
Step 1 Press
Step 2 Press
feed as the remote video source.
----End

8.6 Hiding the Local Video

During a conference, you can hide the local video if you do not want the video to be seen by
remote sites. After this function is enabled, the local site is displayed as a blue screen at
remote sites.
Background
The TE30 is in a conference.
Procedure
Step 1 Choose Advanced Settings > Utilities > Hide Video (Off). When prompted, confirm that
you want to enable the function to hide the local video.
Issue 01 (2013-03-27)
Table 4-4.
on the remote control to switch to the local video.
on the remote control and, in the lower right corner of the screen, select a video
from the option bar. Then specify a video feed as the local presentation
on the remote control to switch to the remote video.
on the remote control and, in the lower right corner of the screen, select a video
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Video and Audio
72