Huawei V100R001 User Manual page 25

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
User name
Password
Server type
Transmissio
n type
Video
request
handling
Issue 01 (2013-03-27)
Description
endpoints that also register with the SIP
server can dial this site number to call
your TE30.
Specifies the name by which the SIP
server identifies your TE30 after it
registers with the SIP server.
Specifies the SIP server type.
 OCS: Select this option if your TE30
registers with the Microsoft Office
Communications Server (OCS) or
Microsoft Lync Server.
 CISCO VCS: Select this option if
your TE30 registers with the Cisco
TelePresence Video Communication
Server (VCS).
 Standard: Select this option if your
TE30 registers with other SIP servers.
Specifies the protocol used for SIP
signaling transmission.
 TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.

UDP: Use the User Datagram
Protocol (UDP) to implement
transmission with reduced latency.

TLS: Use Transport Layer Security
(TLS) to implement transmission
security. If you select this option, you
must import a certificate when your
endpoint registers with a SIP server.
For details, see 11.4.8 Importing a
Certificate.
Specifies how your TE30 handles video
requests from a remote endpoint during a
point-to-point SIP audio call or
multipoint conference.

Accept automatically: Your TE30
automatically accepts video requests
from the remote endpoint.

Reject automatically: Your TE30
automatically rejects video requests
from the remote endpoint.

Manual: Your TE30 prompts you to
accept video requests from the remote
endpoint.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Network
Setting
Example: 12345
The value can consist of
numbers, letters, Chinese
characters, and special symbols
such as @ # %.
Example: ab3@Joe
The default value is Standard.
The default value is UDP.
The default value is Manual.
17