Huawei V100R001 User Manual page 24

Te30 videoconferencing endpoint
Hide thumbs Also See for V100R001:
Table of Contents

Advertisement

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Table 3-3 SIP parameters
Parameter
Register
with server
Server
address
Conference
service
number
Enable
proxy server
Proxy server
address
Site number
Issue 01 (2013-03-27)
Description
Specifies whether to register your TE30
with a SIP server.
If you select this parameter and the
TE30 successfully registers with the
SIP server, the TE30 can call
endpoints defined in the address book
by their IP addresses, numbers, and
names.
If you dot not select this parameter,
the TE30 will not register with any
SIP server and can call other
endpoints by their IP addresses only.
NOTE
If you select this parameter, you must also set
Server address, Conference service
number, Site number, User name, and
Password.
Specifies the IP address or domain name
of the SIP server with which you want
your TE30 to register.
Specifies the conference service number
for your TE30 to initiate conferences
over an IP multimedia subsystem (IMS)
network.
Set this parameter to the conference
service number obtained from the
administrator of the IMS network.
NOTE
Born of the standard IP, the IP Multimedia
Subsystem (IMS) uses VoIP applications
based on the 3rd Generation Partnership
Project (3GPP) SIP to provide fixed and
mobile multimedia services for operators.
Integrating MCUs can enhance the
functionality of the Huawei IMS HD
videoconferencing solution.
Specifies whether to enable the proxy
server. If you set Server address to the
SIP server domain name, select this
parameter.
Specifies the address of the proxy server.
If you set Server address to the SIP
server domain name, set this parameter
to the IP address bound to that domain
name.
Specifies the site number for your TE30.
If your TE30 registers with a SIP server,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Network
Setting
This parameter is deselected by
default.
Example: 192.168.1.10
No default value is set for this
parameter.
This parameter is deselected by
default.
Example: 192.168.1.10
The site number can contain
only digits.
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te30

Table of Contents