Adjusting The Sampling Phase; Setting Video Parameters - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Background
Picture offset may occur in video input or output, such as the computer desktop when it is
displayed on the display screen. You can adjust the picture offset in this case.
Procedure
Step 1 Choose Advanced Settings > Settings > Video > Image Offset.
Step 2 Select VGA IN or VGA OUT.
Step 3 Select Horizontal offset or Vertical offset and move the slider.
----End

8.1.2 Adjusting the Sampling Phase

When the color of a picture displayed on the display is distorted, adjust the sampling phase.
Background
Color distortion may occur in video input when the video is displayed on the display. That is,
the color seen from the computer monitor is different from the color seen from the monitor
connected to your TE30. In this case, you can set the sampling phase to adjust the color.
Procedure
Step 1 Choose Advanced Settings > Settings > Video > Sampling Phase > VGA IN.
Step 2 Move the slider to adjust the sampling phase.
----End

8.1.3 Setting Video Parameters

On your TE30, you can set its video parameters, including the video mode, noise reduction,
and video resolution. You can view the video result of your settings on the display connected
to your endpoint.
Procedure
Choose Advanced Settings > Settings > Video > Video Parameters. Set the video
parameters by referring to
Table 8-1 Video parameters
Parameter
Built-in camera
Picture mode
Issue 01 (2013-03-27)
Table 8-1.
Description
Specifies the output video
display effect.

Standard: reproduces video
more faithfully.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Video and Audio
Setting
The default value is
Standard.
66