Huawei V100R001 User Manual page 49

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Table 6-1 General conference parameters
Parameter
Answer Mode
Open do not
disturb right
Mute local
audio for
answered calls
Call parameter
configuration
Site called
during startup
Wi-Fi network
preferred
Issue 01 (2013-03-27)
Description
Specifies how your TE30 handles
incoming calls.
 Manual: Your TE30 prompts
you to handle a call when the
call comes in.
 Answer call automatically:
Your TE30 automatically
answers incoming calls when
not being used in a conference.
Specifies whether the
do-not-disturb function is available
to all users.
If this function is enabled,
common users can, under
Advanced Settings > Utilities,
enable or disable the
do-not-disturb function, which
prevents you from being disturbed
by incoming calls.
Specifies whether the TE30 turns
off all sounds generated at your
site when your TE30 joins a
conference. If you enable this
parameter, no remote site can hear
your site.
Specifies whether to display a
dialog box for setting the call type
and rate when you initiate a
point-to-point call. If you do not
select this parameter, your TE30
uses the default call type and rate.
Specifies the site to be called
automatically after the startup of
your TE30.

None: The TE30 does not call
any sites after the startup.

Select site from address book:
The TE30 displays the address
book screen, from which you
can specify the site to be called
automatically after the startup
of your TE30.
Specifies whether to prioritize a
Wi-Fi network when both wireless
and wired networks are available.
This parameter is available only
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Setting
The default value is Manual.
This parameter is selected by
default.
This parameter is deselected by
default.
This parameter is deselected by
default.
The default value is None.
This parameter is deselected by
default.
41