Setting Sip Parameters - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
HTTPS
mode
Multipoint
conference
authenticatio
n
Use VoIP
gateway
VoIP
gateway
address
Step 2 Select Save.
----End

3.3 Setting SIP Parameters

To prepare your TE30 for video communication using SIP, set SIP parameters, which includes
whether to register with a SIP server.
Prerequisites
All involved parties in the conference support SIP.
Procedure
Step 1 Choose Advanced Settings > Settings > Network > IP > SIP. Set the SIP parameters by
referring to
Issue 01 (2013-03-27)
Description
Specifies whether to upload information
about conferences initiated from your
TE30 in HTTPS encryption mode.
 This parameter is available when
Huawei GK is selected.
 If you do not select this parameter,
the TE30 will use the Transfer
Control Protocol (TCP) to upload
conference information, which may
be insecure.
Specifies whether a certificate for
authentication is required to initiate a
SiteCall conference. For details about
how to import a certificate, see
Importing a Certificate.
This parameter is available only when
HTTPS mode is selected.
Specifies whether to use a VoIP gateway
and the address of the VoIP gateway. If
you set these two parameters, your TE30
can place calls to PSTN endpoints
connected to the VoIP gateway.
If you select Use VoIP gateway, you
must also set VoIP gateway address.
Table 3-3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
This parameter is selected by
default.
To improve communication
security, select this parameter.
This parameter is deselected by
default.
To improve communication
11.4.8
security, select this parameter.
This parameter is deselected by
default.
3 Network
15