Setting Qos Parameters - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Local IP
address
Subnet mask
DHCP
Start IP
address
End IP
address
Step 3 Select Save.
Under Connected devices, you can view the MAC and IP addresses of all devices connected
to your TE30.
----End

3.5 Setting QoS Parameters

The quality of service (QoS) settings determine the mode for processing IP data packets in a
conference.
Procedure
Step 1 Choose Advanced Settings > Settings > Security > QoS. Set the QoS parameters by
referring to
Table 3-5 QoS parameters
Parameter
QoS type
Issue 01 (2013-03-27)
Description
Specifies the IP address and subnet mask
of your TE30.
Specifies whether your endpoint assigns
IP addresses to devices connected to it.
If you select this parameter, you must
also set Start IP address and End IP
address.
Specifies the IP address segment for the
devices connected to your TE30.
Table 3-5.
Description
Specifies the QoS type. Available values
are Priority and DiffServ.
 Priority: If you select this option,
you must also set IP priority and
Service type.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Network
Setting
If you set Encryption mode to
NONE, the Wi-Fi network
provided by your TE30 is open
to everyone.
Examples:

Local IP address:
192.168.1.10

Subnet mask:
255.255.255.0
This parameter is deselected by
default.
Examples:
 Start IP address:
192.168.1.10
 End IP address:
192.168.1.157
Setting
The default value is Priority.
20