Using The Wizard Screen; Setting General Parameters - Huawei TE30 Manual

1. Use the USB configuration tool to import the configuration file to a USB device. For details, see
the HUAWEI TE30 Videoconferencing Endpoint V100R001C02 Deployment Guide.
2. Insert the USB device into the endpoint's USB port.
3. In the displayed dialog box, select Yes.
4. Using the remote control, enter the administrator password, which is 12345678 by default.
The endpoint automatically loads the configuration file and restarts.
Caution

If the endpoint is powered on for the first time and you do not operate it for 10 seconds, the endpoint also
automatically loads the configuration file and restarts.

To improve device security, set a password at your first login and regularly change the password
see the HUAWEI TE30 Videoconferencing Endpoint V100R001C02 Security Maintenance.
5. After the restart is complete, remove the USB device.

Using the Wizard Screen

When you power on your TE30 for the first time, you can use the remote control to configure your
2
TE30 from the Wizard screen. You can also use the configuration wizard from the TE30 web
interface with the administrator account. By default, the administrator account name and password
are admin and Change_Me, respectively. To improve device security, change the password at your
first login and regularly change the password afterward. For details, see the HUAWEI TE30
Videoconferencing Endpoint V100R001C02 Security Maintenance.

Setting General Parameters

When the TE30 is connected to a monitor and both are powered on, the monitor displays the
3
Wizard screen by default.

The Huawei Service Management Center (SMC) 2.0 is a network management system (NMS). If the endpoint has
been added as a predefined participant on the SMC2.0, set NMS server, Connection type, Local IP address,
Subnet mask, and Gateway address. The endpoint will then automatically obtain the NMS server settings from
the SMC2.0. When the settings are obtained, the configuration process is complete and the conferencing screen is
displayed.
For details about how to predefine a participant on the SMC2.0, see the "Adding a Predefined Participant" section
in the HUAWEI SMC2.0 V100R002 Configuration Guide, which is available at http://enterprise.huawei.com and
choose SUPPORT > Product Support > Unified Communications and Collaboration > Telepresence and
When powered on for the first time, your
TE30 prompts you to select a language.
After you select a language, the screen
shown on the left is displayed for you to set
the general parameters.
10
afterward，