Huawei V100R001 User Manual page 52

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
H.239 video
resolution
Presentation
resolution
H.239 video
bandwidth type
H.239 video
bandwidth(%)
Presentation
plug-and-share
Conference line
type
Conference
bandwidth
Issue 01 (2013-03-27)
Description
 If you select Auto, you must
also set Presentation
resolution.
 If you select Auto, you must
also set H.239 video
resolution.
Specifies the presentation format.
The available options vary
depending on your settings of
H.239 video protocol.
Specifies the presentation video
resolution.
 Smooth: Your TE30 uses a
high frame rate to ensure
smooth video.
 Sharp: Your TE30 uses a high
video resolution to ensure clear
video.
Specifies the mode for setting the
presentation video bandwidth.

Auto: Your TE30
automatically sets the
presentation video bandwidth
based on the bandwidth
available.
 Manual: You must manually
set H.239 video
bandwidth(%).
Specifies the percentage of the
Call bandwidth presentations can
occupy.
Specifies whether your site
automatically shares presentations
with remote sites once
presentation input is detected.
Specifies the type of line used
during a conference.
If you select Auto and your TE30
has registered with a network
gatekeeper (GK), your TE30
preferentially uses H.323 to
initiate a conference.
Specifies the transmission
bandwidth for a conference.
If your TE30 accesses an E1
network through an IP line, set this
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Setting
The default value is Auto.
The default value is Sharp.
The default value is Auto.
The default value is 50.
The default value is Disable.
The default value is Auto.
The default value is Normal.
44