Huawei V100R001 User Manual page 97

HUAWEI TE30 Videoconferencing Endpoint
User Guide
If the TE30 is connected to an IMS network and the conference is managed by the portal
provided by the IMS, this section does not apply.
Template Used to View Sites In Turn
You can preset and save a viewing order of sites in a template. Afterward, you can
conveniently view the sites in the order saved in the template without additional
configuration.
To configure a template to view sites in turn:
Step 1 Log in to the endpoint web interface. Obtain the chair control rights and choose Conference >
Conference Control.
The conference control page for the chair site is displayed.
Step 2 Enable View in Turn and set the viewing order of sites.
----End
To view the sites in the order saved in a template, click Use Template and select the desired
template from the drop-down list box.
Site Template
With the site template function, you can easily group sites based on their regions and types. In
this template, the sites are identified by their site names, and you can easily find a site.
To configure a site template:
Step 1 Choose Address Book > Site Template.
The page for defining a site template is displayed.
Step 2 Create a site template, add groups to the template, and add sites to the groups.
Step 3 Click Save.
When being save successfully, a site template is displayed under Template Name.
When one of the sites in the site template is in a conference, the site template name is listed in
the
----End
Video Monitoring
On the conference control page for the chair site, you can view the video and presentation of a
remote site. You can also adjust the sizes of the video and presentation. In this way, you can
monitor the status and video quality of the remote site.
Issue 01 (2013-03-27)
drop-down list box on the Conference Control page.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Web-based Remote Management
89