Huawei V100R001 User Manual page 36

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Video
resolution
Refresh rate
Stretch mode
Automatic
layout mode
Issue 01 (2013-03-27)
Description
TE30.
 HDMI: Select this option if you use an
integrated cable to connect the HDMI
port in the display to the
MIC/TV/LAN/POWER port on your
TE30.
 DVI: Select this option if you use an
integrated cable to connect the DVI port
in the display to the
MIC/TV/LAN/POWER port on your
TE30.
Specifies the resolution for each video
output port. The available options vary
depending on your settings of Output
mode. Table 4-1 lists the resolutions
supported by the video output ports in each
output mode.
Specifies the video refresh rate. The
available options vary depending on your
settings of Video resolution.
lists the refresh rates available for each
video resolution.
Specifies how to adjust the aspect ratio to
fit the video into the screen.
 Stretch: The aspect ratio is changeable.
 No stretch: The aspect ratio is not
changeable.
 Intelligent stretch: Your TE30 crops
the video to an appropriate size and
stretches the video to full screen with
the original aspect ratio. For example,
to change a wide-screen video to a
narrow-screen video, your TE30 crops
the left and right edges of the
wide-screen video and stretches the
video to full screen.
Specifies the display mode for the
presentation and video.
NOTE
Only the main output port supports this
parameter.
 Full screen: Your TE30 displays the
video or presentation in full screen in
the following priority sequence: remote
presentation, local presentation, remote
video, and local video.
 PiP: The Picture in Picture (PiP)
function is enabled to display the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Display and Camera
Setting
The default value is
1080p.
The default value is
60Hz.
Table 4-2
The default value is
Stretch.
The default value is Full
screen.
28