Backing Up Settings; Capturing Photos - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide

Procedure
Step 1 Log in to the endpoint web interface. Choose Conference > Control Recording.
Step 2 Click Start.
The recording starts.
----End
Follow-up Procedure
To stop recording, click Stop.

11.4.10 Backing Up Settings

The administrator can use the One-Click Backup function to create a configuration backup
file for your endpoint. If some parameter settings under System Settings are inadvertently
deleted or changed, you can use this backup file to restore all settings under System Settings
to the pre-backup settings.
Background
If a configuration backup file is already stored on your endpoint, the new configuration
backup file will replace the original one.
Procedure
Step 1 Log in to the endpoint web interface. Choose System Settings > Installation.
The Installation page is displayed.
Step 2 Click One-Click Backup.
Step 3 On the One-Click Backup page, click Back Up Settings.
Your endpoint then starts to create a configuration backup file. You will be notified when the
backup is complete.
----End
Follow-up Procedure
To restore all settings under System Settings to the latest pre-backup settings, select Restore
Settings. Your endpoint will then restart and restore the settings.

11.4.11 Capturing Photos

To ensure that a conference runs smoothly, you may need to monitor how the endpoint
operates and whether the local and remote videos are displayed properly in the conference
room. From the endpoint web interface, you can capture photos and view local and remote
videos and presentations.
Issue 01 (2013-03-27)
When you are scheduling or initiating a conference on an MCU, select Support
recording under conference settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Web-based Remote Management
91