Configuring Security Settings; Setting The Administrator Password - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
l
l
l
l
l

9.2 Configuring Security Settings

You can set security parameters (such as an administrator password) to to enable H.235
encryption and control whether common users can log in remotely and access certain screens.

9.2.1 Setting the Administrator Password

You can set the administrator password to restrict access to certain screens.
Procedure
Step 1 Choose Settings > Security > Password, and then set the parameters listed in
Table 9-1 Encryption parameters
Parameter
Administrator
Password
Encrypt utilities
Encrypt diagnostics
Step 2 Save the settings.
----End
Issue 09 (2012-09-03)
– Information about whether services at the application layer can be disabled
Authentication modes of the ports Port functions, such as control traffic and data traffic
The Real-time Transport Protocol (RTP) and Transport Layer Security (TLS) are supported
to encrypt voice services.
Web-based diagnostics tools require the correct user name and password to connect to the
terminal. They must be the same as the administrator user name and password for the
terminal web interface, and are encrypted before transmission to the terminal.
For network management, the terminal supports the Simple Network Management Protocol
v3 (SNMP v3), which features higher adaptability and security. The network management
device requires the correct user name (initialmd5 or initialsha by default) to connect to
the terminal.
Robustness testing tools are used to scan protocols to ensure that there are no high-risk
vulnerabilities.
By default, the terminal uses the File Transfer Protocol Secure (FTPS) to encrypt data
through the Secure Sockets Layer (SSL) and ensure data integrity.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The administrator password is left blank by default.
The password must consist of only letters (uppercase and
lowercase) and digits, with a maximum of 32 characters.
After this function is enabled, the administrator password must be
entered to access the Utilities screen.
After this function is enabled, the administrator password must be
entered to access the Diagnostics screen.
9 Security
Table 9-1.
135