Viewing The Combined Picture Of The Presentation And The Video; Joining An Authentication Conference - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Context
When connected to an IMS network, the terminal cannot share a presentation in Live mode.
You can select one of the following modes for sharing a presentation based on the configuration:
l
l
Procedure
Step 1 Select the presentation source to be shared. For details, see section
Source
Step 2 You can press
----End
Follow-up Procedure
When a presentation is being shared, you can press
presentation.
5.5.5 Viewing the Combined Picture of the Presentation and the
Video
During a conference, a combined picture of the video and the presentation can be viewed by
pressing
For details, see section

5.6 Joining an Authentication Conference

If the number of sites that are expected to join the conference is not known, you can set the
number of anonymous sites, and then hold an authentication conference. A site can join the
authentication conference by calling the conference access number.
Context
Figure 5-1
Issue 09 (2012-09-03)
Auto: The terminal automatically sends the video along with the presentation. This option
is available when the H.239 mode is set to Live.
Manual: Use the remote control to share a presentation.
.
to start sharing a presentation.
on the remote control or selecting Layout from the option bar.
7.6 Adjusting the Screen
shows how to join an authentication conference.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Initiating a Conference
7.7 Selecting a Video
on the remote control to stop sharing the
Layout.
93