Upgrading Software Locally Using A Computer - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Table 11-2 Methods for upgrading the terminal software
Method
Upgrading the
software locally
Upgrading the
software using the
minimum system
Upgrading the
software from the web
interface
Before the upgrade, note the following:
l
l
l

11.2.1 Upgrading Software Locally Using a Computer

You can use a computer to upgrade the software of the terminal locally.
Before upgrading, note the following prerequisites:
l
l
Upgrading a Single Terminal
You can upgrade a single terminal using the upgrade program installed on the computer.
Procedure
Step 1 Power on the computer and the terminal.
Step 2 Extract the compressed file of the upgrade software on the computer.
Step 3 Run UpgradeTool.exe to display the window as shown in
Issue 09 (2012-09-03)
Usage
After obtaining the upgrade software, connect a computer to the
terminal directly or over the local area network, and then upgrade
the terminal.
Set the terminal to the upgrade state forcibly. Connect a computer
to the terminal directly or using a switch, turn the switch on the rear
panel of the terminal to Load, and then upgrade the terminal.
NOTE
After obtaining the upgrade software, connect a computer to the
terminal directly or through the local area network, log in to the
terminal web interface, and upgrade the terminal.
Read the Release Notes to understand the contents to be upgraded and precautions required
to be taken during the upgrade.
Check whether the current software version is earlier than the destination version.
Back up the settings on the terminal, such as the communication settings and the address
book.
A copy of the destination software is available on the computer.
The computer is connected to the terminal using a straight through network cable, crossover
network cable, or switch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l If the hardware of the terminal works properly, the software can always
be upgraded successfully.
l If upgrading the software locally fails, you can use this method.
11 Maintenance and Troubleshooting
Figure 11-1.
153