Controlling A Camera; Saving And Using Camera Presets - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
----End

3.3.3 Controlling a Camera

You can exercise PTZ control over a local or remote camera.
Prerequisites
Before you use PTZ functions, ensure that the VISCA control cable is connected to the COM
interface of the terminal properly and that the relevant configuration is correct.
Procedure
Step 1 Press
Step 2 From the camera control screen, you can:
l
l
l
----End
Follow-up Procedure
Press the
instructions to restore the local camera to its default settings.

3.4 Saving and Using Camera Presets

A camera preset is a set of camera settings that have been saved in advance. You can set these
presets in advance.
If a camera supports pan, tilt, and zoom (PTZ) functions, a maximum of 30 camera presets can
be created and saved. Each camera preset saves the camera number, zooming level, and camera
direction. A camera preset remains valid until it is deleted or changed.
Table 3-7
Table 3-7 Features of camera presets
Terminal
Local terminal
Issue 09 (2012-09-03)
TIP
The text on the upper left corner indicates the camera that is currently being controlled (local or remote).
, and then follow the displayed instructions to access the camera control screen.
Press to switch between local and remote cameras. The text on the upper left corner
indicates the camera that is currently being controlled (local or remote).
Press arrow keys to turn the camera lens.
Press to zoom in or
key on the remote control, and then select Reset. You can then follow the
describes the features of camera presets.
Number of Preset
Positions
30
NOTE
Local camera set to SD-CVBS
IN 1, nine local preset positions
are available.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
to zoom out.
3 Camera and Display
Is the Data Lost After Restart?
No
50