Selecting And Controlling A Camera - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Step 2 Select Save.
----End

4.5 Selecting and Controlling a Camera

If you have connected multiple video devices to the video input ports, you must select local
and remote video sources from these devices. Then, you can control the local and remote
cameras to view the desired video.
Selecting a Camera
If the endpoint is not in use during a conference, only the local camera can be selected. If the
endpoint is in use during a conference, both the local and remote cameras can be selected.
Choose Advanced Settings > Settings > Video > Common Settings > Video Input. Set
Video Source Management to Allow. Select a camera as follows:
Press
lower right corner of the screen.
Adjusting the Focal Length
You can change the magnification of distant objects by adjusting the focal length of the
camera.
Step 1 On the option bar, select
Step 2 Select Adjust Focus and adjust the focal length.
----End
Controlling a Camera
You can control pan, tilt, and zoom (PTZ) actions for a local or remote camera.
Before controlling a remote camera, ensure that Remote control has been set correctly for the
remote site.
Step 1 Press
Issue 01 (2013-09-30)
Description
video and stretches the video to till
the screen.
on the remote control and select the desired camera from the list displayed in the
The text in the upper left corner indicates the camera that is currently being controlled (local or remote).
Press on the remote control to toggle between the local and remote cameras.
Choose Advanced Settings > Settings > Video > Common Settings > Video Input. Set Remote
control to Allow.
on the remote control.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
.
4 Display Device and Camera
Setting
55