Huawei TE40 Administrator's Manual page 131

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Figure 11-1 Upgrading a single endpoint
Step 4 (Optional) Click Browser and select the te.dat file.
Step 5 In Remote Terminal IP Address, enter the endpoint IP address, such as 10.10.10.10.
Step 6 Click Upgrade.
Step 7 In the displayed dialog box, enter the upgrade password and click OK.
----End
Upgrading Multiple Endpoints in Batches
Step 1 Power on the computer and endpoint.
Step 2 Extract the compressed software upgrade package on the computer.
Step 3 Run UpgMaster.exe to display the window shown in
Step 4 (Optional) Click Browser and select the te.dat file.
Step 5 Click
Issue 01 (2013-09-30)
By default, the path of the te.dat file is displayed in Upgrade File.
If Reboot is selected, the endpoint automatically restarts after the upgrade.
By default, the path of the te.dat file is displayed in Upgrade File.
shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 11-1 to display the window as shown in
11 Upgrading
11-1.
Figure 11-2.
123