Huawei TE40 Administrator's Manual page 35

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Site number
User name
Password
Server type
Transmissio
n type
Issue 01 (2013-09-30)
Description
server domain name, set this parameter
to the IP address bound to that domain
name.
Specifies the site number for your
endpoint. If your endpoint registers with
a SIP server, endpoints that also register
with the SIP server can dial this site
number to call your endpoint.
Specifies the user name for
authentication registration.
Specifies the password that your
endpoint uses to register with a SIP
server.
For successful authentication on a SIP
server, this password set on your
endpoint must be the same as that set on
the SIP server.
Specifies the SIP server type.

OCS: Select this option if your
endpoint registers with the Microsoft
Office Communications Server
(OCS) or Microsoft Lync Server.
 CISCO VCS: Select this option if
your endpoint registers with the Cisco
TelePresence Video Communication
Server (VCS).
 Standard: Select this option if your
endpoint registers with other SIP
servers.
Specifies the protocol used for SIP
signaling transmission.
 TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.

UDP: Use the User Datagram
Protocol (UDP) to implement
transmission with reduced latency.

TLS: Use Transport Layer Security
(TLS) to implement transmission
security. If you select this option, you
can import a root certificate from the
Web interface when your endpoint
registers with a SIP server. For
details, see 9.3.7 Importing a
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Network
Setting
Enter a value containing any of
the following: letters, digits,
special characters such as @
# %.
Example: 12345
Example: ab3@
Obtain the value of this
parameter from the SIP server
administrator.
Obtain the value of this
parameter from the SIP server
administrator.
The default value is Standard.
The default value is UDP.
27