Connecting A Camera - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide

Figure 4-1 Screen layout example
Figure 4-1
status. For example, the local and remote presentation icons are displayed only when the
following conditions are met:


The icon for the local presentation disappears if the local presentation source is disconnected
from the endpoint. The icon for the remote presentation disappears if the remote presentation
sharing stops.
Before a conference starts, you can set the position of the PiP window on the screen. For
details, see

4.3 Connecting a Camera

You can view the video delivered by a camera only after correctly connecting the camera to
the endpoint and setting the required video input parameters.
Issue 01 (2013-09-30)
use in a conference, press
PiP, two-pane, and three-pane modes.
When the endpoint is in use in a conference, select
a desired layout from the following:
Remote video in full screen
−
− Local video in full screen
− Combination of the local video, remote video, local presentation, and remote
presentation in PiP, two-pane, or three-pane mode
is for your reference. Icons displayed in the rectangle vary according to endpoint
A presentation source is connected to your site. When this happens, the icon for the local
presentation is displayed.
Your site receives a presentation shared by a remote site. When this happens, the icon for
the remote presentation is displayed.
Table 4-9 in 4.2.1 Configuring Video
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
on the remote control to switch between the full screen,
Output.
4 Display Device and Camera
from the option bar and select
50