Huawei TE40 Administrator's Manual page 82

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Conference
service
number
Enable
proxy server
Proxy server
address
Site number
User name
Password
Server type
Transmissio
n type
Issue 01 (2013-09-30)
Description
the endpoint to register.
If you set this parameter to the Lync
Server domain name, enable the domain
name server (DNS). If the DNS is not
enabled, enable Proxy server.
-
-
-
Specifies the site number for your
endpoint.
If your endpoint registers with a Lync
Server, endpoints that also register with
the Lync Server can dial this site number
to call your endpoint.
Specifies the user name for
authentication registration.
Specifies the SIP server type.
 OCS: Select this option if your
endpoint registers with the Microsoft
Office Communications Server
(OCS) or Microsoft Lync Server.

CISCO VCS: Select this option if
your endpoint registers with the Cisco
TelePresence Video Communication
Server (VCS).

Standard: Select this option if your
endpoint registers with other SIP
servers.
Specifies the protocol used for SIP
signaling transmission.
 TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.
 UDP: Use the User Datagram
Protocol (UDP) to implement
transmission with reduced latency.
 TLS: Use Transport Layer Security
(TLS) to implement transmission
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Setting
Example 2: lync.zdtest.com
It is recommended that you set
this parameter to the IP address
of the Lync Server with which
you want your endpoint to
register.
You do not need to set this
parameter.
You do not need to set this
parameter.
You do not need to set this
parameter.
Example: 123@zdtest.com
Obtain this value from the Lync
Server administrator.
Example: lync_1@zdtest.com
Obtain the value of this
parameter from the Lync Server
administrator.
Set this parameter to OCS.
Only TCP and TLS
transmission are supported.
74