Restoring Default Settings - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Problem
is in use during a
conference, you
cannot view the
desired site.

12.3 Restoring Default Settings

If customized endpoint settings do not bring expected effects (for example, the display device
fails to deliver images because of incorrect input or output port settings), use the Restore
Default function to restore your endpoint to its default settings.
Restoring your endpoint to its default settings causes the loss of certain stored information, for
example, site information in the address book, call records, and logs.
Choose Advanced > Settings > Installation > Restore Default. In the displayed dialog box,
enter the endpoint serial number and select OK.
Issue 01 (2013-09-30)
Possible Cause
broadcast, and all the sites must view
that site except the chair site and
broadcast site.
A site is having the floor, and
non-chair sites cannot view other
sites.
The chair site has enabled the Voice
Activation function.
No video is sent from the site you
want to view.
The View Site function is restricted
on the RM or the SMC.
 To view the serial number of your endpoint, choose Advanced > Diagnostics > System
Information > Version.

Press and hold the RESET button on the back of the endpoint for about 10 seconds, and the endpoint
will be restored to its default settings and restart. After the endpoint is restored to its default settings,
its IP address is reset to 192.168.1.1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 Troubleshooting
Solution
site broadcast.
Ask the chair site to enable
the discussion function.
Ask the chair site to
disable the Voice
Activation function.
Ask the related site
administrator to
troubleshoot the site video.
Contact the
videoconferencing system
administrator to resolve
this problem.
140