Connecting To A 4E1 Network - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Encryption
mode
Local IP
address
Subnet mask
DHCP
Start IP
address
End IP
address
Step 3 Select Save.
In the Connected devices list box, you can view the MAC and IP addresses of all the devices
connected to your endpoint.
----End

3.2 Connecting to a 4E1 Network

Only the TE60 supports 4E1 functions. To implement video communication over a 4E1-line
dedicated network, you must connect the TE60 to the network.
Issue 01 (2013-09-30)
Description
Specifies the encryption method used on
the Wi-Fi network. The required key
types vary depending on your settings of
this parameter. If you set Encryption
mode to NONE, the Wi-Fi network
provided by your endpoint is open to
everyone.
Specifies the password used by other
devices to connect to your endpoint.
Specify the IP address and subnet mask
of your endpoint.
Specifies whether your endpoint assigns
IP addresses to devices connected to it.
NOTE
If you select this parameter, you must also set
Start IP address and End IP address.
Specify the IP address segment for the
devices connected to your endpoint.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Network
Setting
Default value: NONE
The required password varies
depending on your settings of
Encryption mode. If you set
Encryption mode to NONE,
the Wi-Fi network provided by
your endpoint is open to
everyone.
Default values:

Local IP address:
192.168.2.1
 Subnet mask:
255.255.255.0
This parameter is selected by
default.
Default values:
 Start IP address:
192.168.2.10

End IP address:
192.168.2.100
31