Adjusting The Picture Offset; Adjusting The Sampling Phase - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide

4.2.2 Adjusting the Picture Offset

If you find that the displayed video deviates from its normal position, adjust the picture offset.
Prerequisites
A VGA or YPbPr video signal source is connected to the endpoint.
Background
VGA or YPbPr Image offset may occur in video input or output, such as when the computer
desktop is displayed on the display.
Procedure
Step 1 Choose Advanced > Settings > Video > Image Offset.
Step 2 Select a video input or output port.
Step 3 Select Horizontal offset or Vertical offset and move the slider to make adjustments.
----End

4.2.3 Adjusting the Sampling Phase

If a blurring or slight jitter issue occurs in the video shown on the display device, adjust the
sampling phase.
Prerequisites
A VGA or YPbPr video signal source is connected to the endpoint.
Background
Images input through a VGA or YPbPr port, such as the computer desktop, may suffer from
blurring or slight jitter.
Procedure
Step 1 Choose Advanced > Settings > Video > Sampling Phase.
Step 2 Select the video input port you want to adjust.
Step 3 Move the slider to adjust the sampling phase.
----End
Issue 01 (2013-09-30)
You can adjust the picture offset only for a video input or output port to which a VGA or YPbPr video
signal source is connected. The ports to which other video signal sources are connected are unavailable
for adjustment.
You can adjust the sampling phase only for a video input port to which a VGA or YPbPr video signal
source is connected. The ports to which other video signal sources are connected are unavailable for
adjustment.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Display Device and Camera
47