Supporting Remote Logins - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
----End

7.3 Supporting Remote Logins

You can specify whether remote users can log in to the endpoint to manage it using the
endpoint web interface, SSH, or Telnet.
Web-based Login
Step 1 Choose Advanced > Settings > Secured > Web Login. Set the web-based login parameters
described in
Table 7-2 Web-based login parameters
Parameter
Web Login
Administrator
name
Current
password
New
password
Confirm
password
SSL
encryption
Issue 01 (2013-09-30)
Table 7-2.
Description
Specifies whether a remote user
can log in to the endpoint web
interface to perform operations
such as setting endpoint
parameters, controlling the
endpoint, and viewing the
endpoint status.
If you select this parameter, you
must also set the administrator
user name and password.
Specify the user name and
password used to log to the
endpoint web interface.
Specifies whether to enable
Security Socket Layer (SSL)
encryption to improve
transmission security.
When SSL encryption is enabled,
the touch panel must use
Hypertext Transfer Protocol
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
This parameter is selected by default.
The administrator name cannot be left
blank and contains a maximum of 64
case-sensitive characters.
In New password, enter a string of 6
to 32 characters.
In addition, it must include at least
two of the following: uppercase letter,
lowercase letter, digit, or special
character.
The default administrator name is
admin.
The default administrator password is
Change_Me.
To protect against unauthorized
access, change the password at your
first login.
When the data to be transferred must
be highly secured, it is recommended
that you select SSL encryption.
This parameter is selected by default.
7 Security
99