Upgrading - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
About This Chapter
Your endpoint supports the following software upgrade methods: automatic, using upgrade
tools, using the bootrom system, and from the endpoint web interface.
During the upgrade, do not power off the endpoint to prevent irreversible faults.
Table 11-1
Table 11-1 Endpoint upgrade methods
Upgrade Method
Automatic upgrade
Tool upgrade
Upgrade using the
bootrom system
Upgrade from the
endpoint web
interface
Before the upgrade, complete the following:
Issue 01 (2013-09-30)
describes the differences between the four upgrade methods.
Description
With the automatic upgrade function enabled and automatic
upgrade parameters set, your endpoint obtains upgrade files from
the specified server and installs the upgrade files when the preset
upgrade interval arrives. For details, see
Download the upgrade software to a computer, connect the
computer to the endpoint directly or over the LAN, and upgrade
the endpoint. For details, see
If upgrading the endpoint using its normal system fails due to a
power failure or other causes, you can use the bootrom system to
complete the upgrade For details, see
Endpoint Using the Bootrom
On the endpoint web interface, manually upgrade the endpoint or
set it to upgrade automatically. For details, see
Endpoint on Its Web
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11

Upgrading

11.1 Automatic
11.2 Tool Upgrade.
11.3 Upgrading the
System.
Interface.
11 Upgrading
Upgrade.
11.4 Upgrading the
120