Joining An Hd Video Conference Over An Ims Network - Huawei TE20 Administrator's Manual

TE20 Videoconferencing Endpoint
Administrator Guide
Step 3 Press the
control.


Figure 3-3 Entering the conference password
Step 4 Press any number key on the remote control.
The Two-Stage Dialing dialog box is displayed.
Step 5 Enter the conference password and press the # key to join the conference.
----End

3.2.2 Joining an HD Video Conference over an IMS Network

Prerequisites


Procedure
Step 1 On the main menu, press any number key on the remote control.
The Speed Dial page is displayed, as shown in Figure 3-1.
Step 2 In the text box, enter the conference access number.
Issue 01 (2016-09-01)
button on the remote control, switch to
If no password is set for the conference, the endpoint joins the conference directly.
If a password is set for the conference, the screen shown in Figure 3-3 is displayed, and
continue Step 4 and Step
You have obtained the conference access number and password (optional) from the
conference convener.
You have set IMS parameters. For details, see 4.2.2 Joining an HD Video Conference
over an IMS Network.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Conference Operations Using the Remote Control
5.
, and press the on the remote
16