Table of Contents
Advertisement
TE20 Videoconferencing Endpoint
Administrator Guide
Backup Settings
The Backup Settings procedure is as follows:
Step 1 Log in to the endpoint web interface as the administrator.
Step 2 Choose System Settings > Installation.
The Installation page is displayed.
Step 3 Click One-Click Backup.
The One-Click Backup dialog box is displayed.
Step 4 Click Backup Settings.
The endpoint starts backing up its configuration file. If the backup is complete, a success
message will be displayed.
----End
Using the Backup Configuration File to Restore the System
The restoration procedure is as follows:
Step 1 Log in to the endpoint web interface as the administrator.
Step 2 Choose System Settings > Installation.
The Installation page is displayed.
Step 3 Click One-Click Backup.
The One-Click Backup dialog box is displayed.
Step 4 Click Restore Backup Settings.
The endpoint starts using the backup configuration file to restore the system.
----End
9.10 Restoring Factory Settings
Use the Restore Default function to restore the endpoint to its factory settings.
Issue 01 (2016-09-01)
After the restoration is complete, the endpoint will automatically restart. The settings
under System Settings will be restored to those contained in the backup configuration
file.
Before upgrading the endpoint, it is recommended that you back up the settings under
System Settings. If the upgrade fails, you can use the backup data to restore the system.
If some parameter settings under System Settings are inadvertently deleted or modified,
you can use this backup file to restore all the settings.
After the restoration is complete, the endpoint will automatically restart.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Routine Maintenance
74
Advertisement
Table of Contents
