Table of Contents
Advertisement
TE20 Videoconferencing Endpoint
Administrator Guide
Step 10 Click the Advanced tab. Select Use TLS 1.1 or Use TLS 1.2 under Settings.
Step 11 Click OK.
The configuration is complete.
----End
If you use Mozilla Firefox or Google Chrome, set it as follows:
2.2.3 Logging In to the Web Interface
You can remotely manage the endpoint after logging in to the endpoint web interface.
Prerequisites
Before logging in to the web interface, configure your browser. For details, see 2.2.2
Configuring the Browser.
Procedure
Step 1 Open Internet Explorer.
Step 2 In the address box, enter the endpoint IP address, such as 192.168.1.1.
Step 3 Press Enter.
Log in to the endpoint web interface, as shown in Figure 2-5.
Figure 2-5 Endpoint web login
Issue 01 (2016-09-01)
To ensure that information can be properly displayed, if you choose to skip
choose Tools > Pop-up Blocker > Turn Off Pop-up Blocker from the menu bar of Internet Explorer.
Click
in the right corner of the Firefox menu bar to open the settings window.
Click Privacy, select Accept cookies from sites, and click OK.
Use the default settings for Google Chrome.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Getting Started
Step 6
through
Step
8,
11
Advertisement
Table of Contents
