Setting The Answering Mode; Muting The Local Microphone After Answering A Call - Huawei TE20 Administrator's Manual

TE20 Videoconferencing Endpoint
Administrator Guide
The
complete.
Step 3 On the computer desktop, double-click
Step 4 Connect the AirPresence client to your endpoint using either of the following methods:


Step 5 In the dialog box that is displayed, enter the AirPresence password (default: Change_Me), and
click Connect.
If the endpoint is not used in a conference, the computer desktop is shared as a presentation
with the endpoint.
If the endpoint is used in a conference, you can click Share to send the computer desktop to
all sites.
----End

4.5 Setting the Answering Mode

On the endpoint web interface, you can set the answering mode.
Background
The following answering modes are available:


Procedure
Step 1 Choose System Settings > Conference and click the General Settings tab.
Step 2 Set Answer mode to Manual or Auto.
----End

4.6 Muting the Local Microphone After Answering a Call

On the endpoint web interface, you can set the function of automatically muting the local
microphone after the endpoint answers a conference invitation call.
Issue 01 (2016-09-01)
icon of the AirPresence client is displayed on the desktop when the installation is
In the list of endpoint search results, select an endpoint to connect, and click
Enter the IP address of your endpoint and click
When the Received a connection request from an AirPresence client. Accept the request? message is
displayed on the endpoint web interface and remote control UI, select Yes. The client then successfully
connects to the endpoint without any passwords.
Manual (default): Your endpoint prompts you to handle a call when the call comes in.
Auto: Your endpoint automatically answers incoming calls when not being used in a
conference.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Conference Operations Using the Web Interface
. The AirPresence dialog box is displayed.
.
.
50