Conference Operations Using The Remote Control; Initiating A Point-To-Point Conference - Huawei TE20 Administrator's Manual

TE20 Videoconferencing Endpoint
Administrator Guide
3
Conference Operations Using the Remote
On the remote control interface of the endpoint, you can join a conference in diverse ways.
During a conference, you can control the conference, sharing a document, and configure the
image layout.

3.1 Initiating a Point-to-Point Conference

You can initiate a point-to-point conference by placing a call to a remote site on the
conferencing screen.
On the main menu, press the
Figure 3-1 Speed dial
Issue 01 (2016-09-01)
button on the remote control to enter the Speed Dial screen, as shown in Figure 3-1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

3 Conference Operations Using the Remote Control

button on the remote control, switch to
Control
, and press the
13