Huawei TE20 Administrator's Manual page 66

TE20 Videoconferencing Endpoint
Administrator Guide
Parameter
Type
Rate
Country/Reg
ion code
Area code
Number
IP address
URI
Center codec
number
Center codec
Issue 01 (2016-09-01)
Description
Specifies the type of the line the site uses to
access the videoconferencing network.
 If you select IP, your endpoint will use the
protocol set for Preferred IP protocol to
call the site.
 If you set Category to CT site, the
available value for Type is SIP.
Specifies the data transmission rate of the line
selected for the remote endpoint.
The supported data transmission rates vary
depending on the type of the site you want to
call.
Specifies the country or area where the site is
located.
This parameter is available only for integrated
services digital network (ISDN) and public
switched telephone network (PSTN) sites.
Specifies the area code for the site.
This parameter is available only for ISDN and
PSTN sites.
Specifies the site number used to place calls
between sites.
This parameter is unavailable for an ISDN
site.
 IP, E1, 4E1, ISDN, and H.323 phone site
numbers are allocated by the
videoconferencing service provider.
 PSTN site numbers are telephone numbers.
Specifies the IP address of the site.
NOTE
 The IP address parameter is unavailable for a
Ordinary site whose Type is ISDN, PSTN, E1,
or 4E1.

The IP address parameter is unavailable for a
Telepresence site.
 This parameter is unavailable if you set
Category to CT site.
Specifies the uniform resource identifier (URI)
of the site, for example, abcd@huawei.com.
NOTE
This parameter is available only when Type is set to
IP, H.323, or SIP.
These parameters are available only after
Category is set to Telepresence site.
These parameters specify the numbers and IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Address Book Management
Setting
The default value is
H.323.
Select the highest
available data
transmission rate.
No default value is set for
this parameter.
No default value is set for
this parameter.
No default value is set for
this parameter.
No default value is set for
this parameter.
No default value is set for
this parameter.
No default values are set
for these parameters.
58