Table of Contents
Advertisement
HUAWEI DP300 Desktop Presence
User Guide
The microphone referred to in the section is the local microphone. The microphone referred to in
a Conference
sites cannot hear that site until the chair site unmutes that site's microphone.
6.12 Selecting and Controlling a Camera
Select local and remote video sources and control the local and remote cameras to obtain the
desired view.
6.12.1 Selecting a Camera
To control a local or remote camera, select the camera first.
If the DP300 is not in a conference, you can select only local cameras. After the DP300 joins a
conference, you can select both local and remote cameras.
If an endpoint connects to more than one cameras locally, you can choose to view a local video
on one display or view multiple local videos in multi-view mode on one display.
Prerequisites
l
l
Procedure
Step 1 Tap
Step 2 Tap
Step 3 Tap
----End
6.12.2 Adjusting the Focal Length
By adjusting the focal length of local and remote cameras, you can control the cameras to zoom
in or out.
Step 1 Tap
Issue 01 (2015-09-15)
NOTE
is the microphone of any site in a conference. If the chair site mutes a site's microphone, other
NOTE
When the DP300 serves as a remote site, its camera does not support Far-End Camera Control (FECC).
That is, its camera cannot be controlled by other sites.
Ensure that Video Source Management has been enabled. For details, see Configuring
Video Input in the HUAWEI DP300 Desktop Presence V500R002C00 Administrator
Guide.
For details about video input and output capabilities and parameters, and the procedure for
setting the multi-view mode, see Setting Video Parameters in the HUAWEI DP300
Desktop Presence V500R002C00 Administrator Guide.
, and tap
to access the camera control screen.
to switch between local and remote cameras.
to select a local or remote camera or multi-view.
and tap
.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Initiating a Conference
6.5 Controlling
41
Advertisement
Table of Contents
