Selecting A Video Source - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
l
l
Besides the six layout icons shown in the preceding figure, the icon for the local or remote
presentation may be seen if:
l
l
The icon for the local or remote presentation disappears once the local presentation source is
disconnected or the sharing of the remote presentation stops.
Before a conference starts, you can set the position of the small window in picture-in-picture
mode. For details, see section

7.7 Selecting a Video Source

You can set video input interfaces for the local video, local presentation, and remote video.
Local Video Source
Press
screen, and then select a local input interface as the local video source.
SXGA indicates a computer desktop connected to the HD IN 3 interface or other inputs in Super
eXtended Graphics Array (SXGA) format. The terminal can identify the input mode
automatically.
Issue 09 (2012-09-03)
Pressing on the remote control to switch between the full screen, picture in picture, 2
panes, and 3 panes.
Selecting Layout from the option bar to display the following screen from which you can
select a desired layout.
– Remote video in full-screen mode
– Local video in full-screen mode
– A combination of the local video, remote video, local presentation, or remote
presentation in picture-in-picture, two-pane, or three-pane mode
A presentation source is connected to the local site. In this case, the icon for the local
presentation is displayed.
The local site receives the presentation shared by a remote site. In this case, the icon for
the remote presentation is displayed.
NOTE
The ViewPoint 9039, ViewPoint 9036, ViewPoint 9035, ViewPoint 9033, ViewPoint 9030, and HUAWEI
VP9035A support video input with a resolution of up to 1080p 30 Hz.
on the remote control. Choose Switch Camera or Video Source from the displayed
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3.6 Setting Video Output
7 Video and Audio
Parameters.
125