Connecting Cables - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Label
SD IN 1
SD IN 2
COM 1
COM 2
LAN 1
LAN 2
USB
LAN-POE
MIC
Slot for an E1, a
PSTN-E1, or a
4E1 interface
card
POWER

1.4 Connecting Cables

This section describes how to set up an HD videoconferencing environment using a simple
configuration.
Issue 09 (2012-09-03)
Interface Description
SD camera The SD IN 1 interfaces of the ViewPoint 9039,
interfaces ViewPoint 9036, ViewPoint 9035, and ViewPoint 9033
are RCA interfaces to which CVBS signals are input.
The SD IN 1 interfaces of the ViewPoint 9039S,
HUAWEI VP9039A and HUAWEI VP9036Sare DVI
interfaces. A DVI-(HDMI/VGA/S-Video/CVBS)
conversion cable can be connected to the SD IN 1
interface so that CVBS and S-Video signals can be input.
The SD IN 1 interface of the HUAWEI VP9035A is an
S-Video interface to which S-Video signals are input. A
conversion cable can be connected to the SD IN 1
interface so that CVBS signals can be input.
NOTE
Serial ports These are dual-mode interfaces that can be used as RS232
or RS422 interfaces. Camera control cables can be
connected to these interfaces. In addition, these interfaces
can be used for diagnostics and maintenance.
Ethernet 10M/100M full duplex interfaces
interfaces
USB port Both USB ports support a bandwidth of 480 Mbit/s, 12
Mbit/s, or 1.5 Mbit/s.
Microphone This is a 10M/100M full duplex interface for connection
array interface to the microphone array.
E1, PSTN, and An E1 interface supports a bandwidth ranging from 64
4E1 interfaces kbit/s to 2 Mbit/s.
A 4E1 interface supports a bandwidth ranging from 64
kbit/s to 8 Mbit/s.
A PSTN interface supports a 64 kbit/s bandwidth.
Power l ViewPoint 9039: 24 V; 6 A; the maximum power in
interface
l Other models: 24 V; 4.17 A; the maximum power in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l The ViewPoint 9039 and the ViewPoint 9036 provide both
SD IN 1 and SD IN 2 interfaces.
l The ViewPoint 9030 does not provide an SD IN 1 or SD IN
2 interface.
full configuration is 150 W.
full configuration is 100 W.
1 Installation and Preparation
11