Cable Connection; Cables; Attaching Cable Labels - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide

4.1 Cables

Before connecting the cables, label them according to section
TB201 Interface Box

4.1.1 Attaching Cable Labels

Step 1 Verify the cable labels based on the PNs on them.
Each cable label has a duplicate one and is available in English and Chinese. The content in both
languages is consistent.
Figure 4-1 Cable labels
Step 2 Attach four labels (two English and two Chinese labels) to the correct cable.
Ensure that:
l One English label and one Chinese label are attached at one end of the cable.
l The two labels touch each other.
l The Chinese label is closer to the cable connector, about 10 cm away from the connector.
Issue 01 (2015-02-12)
and 4.1.2 Cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4

Cable Connection

4.2.1 Cabling for the RP with a
Connectors.
4 Cable Connection
48