Device Control; Setting Video Control Parameters - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide
Parameter
Telnet login
GUI settings
Encryption advanced settings Do not allow
Current password
New password
Confirm password
Air Content Sharing
Password
Upgrade password
Upgrade password
Account Lock
Maximum login attempts
Lock time

6.9 Device Control

Device control settings include parameters for audio and video control.

6.9.1 Setting Video Control Parameters

Choose Device Control > Video Control and set the parameters according to
Figure 6-17 Video input and output sources
Issue 01 (2015-02-12)
Default Value
Do not allow
12345678
None
None
Change_Me
Change_Me
5
After 5 min
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 System Settings
Remarks
Recommended value.
Set it to Allow when
commissioning the system.
None
Default value. Set it based on
the actual condition.
Set it based on the actual
condition.
Set it based on the actual
condition.
Default value. Set it based on
the actual condition.
Default value. Set it based on
the actual condition.
Default value.
Default value.
Table 6-13.
82