Huawei RP100 Commissioning Manual page 44

HUAWEI RP100&RP200 Room Presence
Commissioning Guide
Figure 3-32 Installing the pad
l When installing the TE40, push the pad to the front most and then fasten the screws.
l To remove the HD display, loosen the camera pad, push the TE40 to the back, and then take
Step 5 Keep the camera lens facing the front and install the TE40 on the rack top, as shown in
3-33.
Issue 01 (2015-02-12)
NOTICE
off the HD display.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Figure
37