Installing The Te40 Codec - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide
Step 14 Lift and move the HD displays to the front of the rack. Connect the HD display power cable to
the right HD display shown in
RP V100R001C04 Series Telepresence System Connection Diagrams.
Step 15 Mount the screws on the back of the HD displays into the corresponding holes on the rack, as
shown in
Figure 3-28 Mounting the HD displays
Step 16 Connect cables to the HD display. For details about cable connections, see the HUAWEI RP
V100R001C04 Series Telepresence System Connection Diagrams.
----End

3.5 Installing the TE40 Codec

Step 1 Remove the pad from the rack top using a Phillips screwdriver, as shown in
Figure 3-29 Removing the pad
Step 2 Remove the cable clamp from the pad, as shown in
Issue 01 (2015-02-12)
Figure
Figure 3-28.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-28. For details about cable connections, see the HUAWEI
Figure 3-30.
3 Installation
Figure 3-29.
34