Noise From The Power Adapter Bracket - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide
Figure 3-44 Adjusting the horizontal bars

3.7.3 Noise From the Power Adapter Bracket

Symptom
Noise is generated by the swinging of the camera's power adapter bracket when you move the
rack.
Cause
There is only one power adapter bracket mounted to the horizontal bar of the rack, leaving extra
moving space.
Installation Techniques
Move the power adapter bracket to the rightmost corner of the rack and attach a viscose cable
tie to the left side of the power adapter bracket, as shown in
Issue 01 (2015-02-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Figure 3-45.
46