Configuring An Ip Lan Network; Status Indicators Of The Lan Interface; Setting Ip Parameters - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Parameter
Bold
Display time and
zone
Horizontal offset
Vertical offset
The parameter settings take effect once the settings are saved.

2.5 Configuring an IP LAN Network

The IP LAN parameters of the terminal must be set so that the terminal can communicate with
other network devices.

2.5.1 Status Indicators of the LAN Interface

The status indicators on the LAN interface can quickly provide information about the current
network connection.
There are two indicators working together to indicate the network connection, as shown in
2-3.
Table 2-3 Status indicators of the LAN interface
Indicator Status
The orange indicator is off.
The orange indicator is on.
The green indicator blinks.
The green indicator is off.

2.5.2 Setting IP Parameters

The IP parameters of the terminal must be set to allow video communications over an IP LAN
network.
Issue 09 (2012-09-03)
Description
This specifies whether the site name is displayed in bold.
This specifies whether to display the time and zone of the local site on
the home screen.
This fine-tunes the site name's location leftward and rightward on the
GUI controlled by the remote control.
This fine-tunes the site name's location upwards and downwards on the
GUI controlled by the remote control.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Connection Status
The LAN interface is in 10 M network interface mode.
The LAN interface is in 100 M network interface mode.
Data is being transmitted. The green indicator turns off
each time a frame of data has been transmitted.
No data is being transmitted or the network is not
reachable.
2 Network
Table
27