Setting Video Output Parameters - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Table 3-10
Table 3-10 Interfaces and cables
Interface → Format Required by a
Display
DVI-I interface → DVI format
DVI-I interface → SXGA/VGA format DVI-SXGA cable
DVI-I interface → HDMI format
DVI-I interface → YPrPb format
RCA (CVBS) interface → CVBS
format
RCA (CVBS) interface → S-Video
format
S-Video interface → S-Video format
S-Video interface → CVBS format
DVI-I interface → SXGA/VGA,
CVBS, S-Video, and HDMI format

3.6 Setting Video Output Parameters

After connecting cables, the video output parameters need to be set to achieve the desired video
quality.
To set the output mode for a video output interface, do the following:
From the home screen, choose Settings > Video > Video Output to display the Video
Output screen.
Configuring HD Video Output Interfaces
Select an HD video output interface to be configured, such as the HD OUT 1 interface, and then
set the parameters listed in
Table 3-11 HD video output parameters
Parameter
Name
Issue 09 (2012-09-03)
NOTE
Please use the cables provided along with the HUAWEI 9000. Other cables may not be able to ensure the
quality as desired. It is recommended that you contact the device supplier to purchase the relevant cables.
lists the cables that you may require.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Cable to Be Used
DVI extension cable
DVI-I-HDMI cable
DVI-YPrPb (component video) cable
CVBS cable
CVBS-S-Video cable
S-Video cable
S-Video-CVBS cable
DVI-(HDMI/VGA/S-Video/CVBS) conversion
cable
Table 3-11.
Description
This specifies the name of an output interface to simplify
identifying and using the interface during a conference.
3 Camera and Display
54