Sending Hd Video; Displaying Hd Video - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
The HD capabilities of the HUAWEI 9000 are listed as follows:
l
l
l
The terminal can send or receive the desktop contents of a computer while sending or receiving
HD video. If two channels of streams, which are the video and presentation, can be transmitted
in a conference, the conference is a dual-stream conference. For details, see
an H.239 Dual-Stream

5.4.1 Sending HD Video

To send HD video, perform the following operations:
Procedure
Step 1 Connect the terminal to an HD video source, for example, an HD camera.
Step 2 Choose Settings > Video > Video Input, and then set the HD camera model and other relevant
parameters.
Step 3 Set the conference parameters described in section
follows:
l
l
Step 4 Initiate a conference. The recommended setting of the conference rate is 2 Mbit/s or higher.
----End

5.4.2 Displaying HD Video

To receive HD video from a remote site, perform the following operations:
Context
It is recommended that you use an HD monitor with a 16:9 liquid crystal display (LCD) to display
the HD video. The system can automatically detect the monitor which is connected to the
terminal.
Whether the video is displayed with an aspect ratio of 4:3 or 16:9 depends on the video protocol
and the setting of the video resolution. If the local site needs to display the 4:3 video from a
remote site on the monitor with a 16:9 LCD, the terminal adjusts the video without distorting it.
Black borders may exist at the four sides after the terminal adjusts the video so as not to affect
the viewing experience.
Procedure
Step 1 Connect the terminal to an HD monitor (the recommended interface being HD OUT 1).
Step 2 Choose Settings > Video > Video Output, and then set the video resolution for the HD OUT
interface and configure the interface to output remote video.
Issue 09 (2012-09-03)
Sending HD video to remote sites
Receiving HD video from remote sites
Displaying HD video of the local site
Conference.
Set Video protocol to H.264.
Set Video resolution to 720p or a higher resolution.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Initiating a Conference
5.3 Setting Conference Parameters
5.5 Experiencing
as
90