Camera And Display - Huawei 9000 VCT V100R011 Administrator's Manual

Hd video terminal

Table of Contents

HUAWEI 9000 HD Video Terminal

Administrator Guide

About This Chapter

Before using the terminal, ensure that the terminal is properly connected to the input and output

devices, such as a camera and a display. This chapter describes how to connect the terminal to

these devices.

Video devices include video input devices, such as a camera, DVD player, and computer, and

video output devices, such as displays used to output the user interface and videos. One of the

commonly used displays is a TV. To achieve HD video quality, the preceding devices need to

have the capability of 720p, H.264 4CIF, or above.

3.1 Connecting a Camera

The terminal supports various camera models, such as SONY EVI-HD1, CANON V50,

ViewPoint C500 HD camera (C500 for short), HUAWEI VPC500 HD camera (VPC500 for

short), and HUAWEI VPC520 HD camera (VPC520 for short), HUAWEI VPC500S HD camera

(VPC500S for short), and HUAWEI VPC500E HD camera (VPC500E for short). After a camera

is connected to the terminal, it can be controlled using the COM interface of the terminal.

3.2 Setting Camera Parameters

The terminal can display video captured by the camera properly only after the camera parameters

are set correctly.

3.3 Selecting and Controlling a Camera

If you have connected multiple video devices to the video input interfaces, you must select local

and remote video sources from the connected devices.

3.4 Saving and Using Camera Presets

A camera preset is a set of camera settings that have been saved in advance. You can set these

presets in advance.

3.5 Connecting a Display

When connecting displays to the terminal, choose cables based on the relevant interfaces.

3.6 Setting Video Output Parameters

After connecting cables, the video output parameters need to be set to achieve the desired video

quality.

3.7 Connecting a Computer

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential