Connecting A Vpm220; Connecting A Vpm220W - Huawei V100R001 User Manual

Te30 videoconferencing endpoint
Hide thumbs Also See for V100R001:
Table of Contents

Advertisement

HUAWEI TE30 Videoconferencing Endpoint
User Guide

5.1.1 Connecting a VPM220

The VP220 provides 180° sound pickup and an optimal pickup range of six meters. Use the
10 m proprietary cable provided with the VPM220 to connect the HD-AI connector of the
TE30 integrated cable to the IN port on a VPM220. Once the connection is set up, your TE30
automatically uses the VPM220 instead of its built-in microphone for sound pickup.
The status indicators can quickly provide information about the VPM220 working status.
Table 5-2
Table 5-2 VPM220 status indicators
Indicator Status
All red
All blue
All blue and blinking in turn clockwise
All off
For more information, see the HUAWEI VPM220 Microphone Array User Guide and
HUAWEI VPM220 Microphone Array Quick Start Guide.

5.1.2 Connecting a VPM220W

After a VPM220W connects to the TE30 over Wi-Fi, the TE30 automatically uses the
VPM220W instead of its built-in microphone for sound pickup.
Prerequisites
The Wi-Fi hotspot is enabled and Wi-Fi parameters are set as follows:
For details, see
Procedure
Step 1 Press the power button at the bottom of the VPM220W to power it on.
The VPM220W automatically scans for available Wi-Fi networks.
Issue 01 (2013-03-27)
describe the status indicators.
The encryption mode is set to WPA-PSK or WPA2-PSK.
DHCP is enabled and Start IP address and End IP address are set correctly.
Setting Wi-Fi Hotspot
If a VPM220W has been connected to your TE30, the connection between the two is
automatically set up, and you can skip the following steps.
If the VPM220W is used for the first time or fails to obtain an IP address, proceed to
Step 2
and
Step
3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
VPM220 Status
Microphones in all the three directions
are muted.
Microphones in all the three directions
are unmuted or working correctly.
The VPM220 starts properly and is
obtaining an ID.
The VPM220 is reconnecting to the
TE30.
The VPM220 is in sleep mode.
Parameters.
5 Microphone and Speaker
34

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te30

Table of Contents