Configuring External Opc Server Properties; Configuring External Opc Server Subnetwork Properties; Configuring External Opc Ied Device - ABB COM600 series User Manual

3.5.2.
3.5.3.
3.5.4.
24
COM600 series, Version 4.1
External OPC Server User's Manual

Configuring External OPC Server properties

Table 3.5.2-1 External OPC Server properties
Property/Parameter
Source OPC Server
ProgID
Remote Node Name
Tree Delimiter
Use Remote Node Names

Configuring External OPC Server Subnetwork properties

There are no configurable subnetwork properties in the External OPC Server.

Configuring External OPC IED Device

Table 3.5.4-1 lists the configurable properties for virtual object presenting the possible
physical devices on the 3rd party system, and value ranges for these properties. The
actual configuration by using SAB600 is performed as described in 3.5.1, General about
configuring objects.
Table 3.5.4-1 External OPC IED properties
Name Value or Value range/ Default
Basic
In Use In use
Not in use
Default: In use
Simulation Mode True
False
Default: False
Value or Value range/Default
localhost
Default value is "." character.
True
False
Default: True
Description
Specifies whether IED is in use or not.
Defines whether IED is used in simulation
mode.
1MRS757274
Description
Defines the ProgID of the
mapped server.
Defines the remote node name
of the mapped server (IP
address).
Defines the tree delimiter
mapped server uses.
Enables the use of remote
node names.